Nylon Slings, Chain Slings, Wire Rope Slings
Satisfying Customer Demands since 1934
EM Blues manufactures and assembles a wide variety of Nylon Slings, Ratchet Tie Downs,
and many other Nylon Tie Down Assemblies.
EM Blues also carries a full line of Grade 100 Alloy Chain Slings, Grade 70 Binder Chains,
as well as other Chain Assemblies.
EM Blues offers a complete line of Wire Rope Slings from a simple Eye and Eye Sling to a large capacity
Pendant Line or Socket Line capable of the most specialized lift.
Click the above image for Nylon Slings PDF
Chain Slings
 |
 |
Single and Double Slings |
Triple and Quadruple Slings |
Wire Rope Slings
 |
 |
|---|---|
| Single Leg Slings PDF | Two Leg Slings PDF |
 |
 |
| Three Leg Slings PDF | Four Leg Slings PDF |
Small Diameter Assemblies
Lanyards
Lanyards help prevent the loss of fasteners and should be used for retaining purposes only. Types A (2 Terminals), B (Terminal and Loop), C (2 Loops and Tab), and D (2 Loops) are available in either 3/64” galvanized steel of Type 304 stainless and nylon-coated to a 1/16” outside diameter. Types E (2 Loops and Tab) and F (2 Loops) are 1/16” galvanized steel, nylon coated to a 3/32” outside diameter.
Click the image below for Lanyard PDF.
Terminals (Types A & B) are of zinc plated copper with a #10 hole for galvanized cable and 304 stainless steel with a .190 hole stainless steel lanyards
Sleeves (Types B,C,D,E and F) are made of aluminum and are 3/8” long.
Tabs (Types C & E) are made of type 304 stainless steel and are 1-1/4” long overall with a .203 diameter hole for fastening.
Please contact EM Blues today!
Lanyards help prevent the loss of fasteners and should be used for retaining purposes only. Types A (2 Terminals), B (Terminal and Loop), C (2 Loops and Tab), and D (2 Loops) are available in either 3/64” galvanized steel of Type 304 stainless and nylon-coated to a 1/16” outside diameter. Types E (2 Loops and Tab) and F (2 Loops) are 1/16” galvanized steel, nylon coated to a 3/32” outside diameter.
Click the image below for Lanyard PDF.
Terminals (Types A & B) are of zinc plated copper with a #10 hole for galvanized cable and 304 stainless steel with a .190 hole stainless steel lanyards
Sleeves (Types B,C,D,E and F) are made of aluminum and are 3/8” long.
Tabs (Types C & E) are made of type 304 stainless steel and are 1-1/4” long overall with a .203 diameter hole for fastening.
Please contact EM Blues today!
